Skip to content
TVRight, home

How do you hide TV wires?

Three ways, from simplest to cleanest: bundle the cables neatly behind the TV and down to the console, cover them with a slim cord cover painted to match the wall, or run them inside the wall with an in-wall power kit made for exactly that. What you never do is push the TV's own power cord through the wall: regular power cords aren't made to run inside walls, and the electrical code says no.

Updated

Simplest
Bundled behind the TV and down to the console
Cleanest
Inside the wall, with an in-wall power kit
Never
The TV's own power cord inside the wall
Gerald isn't his real name. His 1935 photo comes from the Library of Congress.

Option 1: bundle them

The simplest fix. Gather the cables behind the TV with reusable ties and run them straight down, together, to the console. It works best when the console sits right under the TV, so the bundle is short and mostly hidden behind the screen. Nothing gets cut and nothing gets painted.

Option 2: a paintable cord cover

A cord cover is a slim channel fixed to the wall from the TV down to the outlet or the console, with the cables inside. Painted the same color as the wall, it nearly disappears, and the wall itself stays whole. We fit one for $35.

Option 3: inside the wall, with a kit made for it

The cleanest look: nothing on the wall at all. An in-wall power kit puts a recessed plate behind the TV and another low on the wall, joined inside the wall by wiring made for that job. The TV's own cord only plugs in behind the TV, and HDMI and other low-voltage cables pass through the same plates. It needs a wall with an open space between the studs, so it suits most drywall but not brick or block. We install one for $109.

What you never do

Never push the TV's own power cord through the wall and plug it in below. It looks the same as an in-wall kit from the room, but it breaks the electrical code. The National Electrical Code (section 400.12 in recent editions) doesn't allow flexible cords like a TV's power cord to run through holes in walls or be hidden inside them; Gizmodo quoted the rule back in 2009, when it was numbered 400.8. Electrical trade magazine EC&M puts it plainly: concealing power supply cords in the wall is a violation, and the same rule covers walls, floors and ceilings.

The reason is simple: a cord inside a wall is out of sight. If it gets pinched, nicked or worn, nobody sees it. In-wall kits exist so the part inside the wall is wiring made to be there.

Need a new outlet behind the TV?

Sometimes the tidiest answer is an outlet right behind the TV, which is what Gizmodo suggests too. Adding or moving an outlet is electrical work that requires a licensed electrician in Texas. We don't do licensed electrical work, but we'll tell you exactly where the outlet should go so an electrician can add it, and we'll plan the TV around it.

Which one for your wall?

  • Console right under the TV: bundle the cables behind it.
  • No console, or a long run to the outlet: a cord cover painted to match.
  • Drywall, and you want nothing showing: an in-wall kit.
  • Brick, stone or a fireplace surround: usually a cord cover, routed down the side. More on wires over a fireplace.

Mounting a soundbar too? Its cable takes the same route. Where the soundbar goes.

Some TVs we've mounted

Real installs around San Antonio. Tap a photo to see it larger.

Showing 3 projects

Related questions

Can you hide the wires?

Yes. Options range from bundling cables neatly behind the TV, to a slim paintable cord cover on the wall, to in-wall concealment on suitable walls using kits rated for in-wall use. We never run standard power cords inside a wall, because they aren't rated for it.

Wire management options

Can you add an outlet behind the TV?

Adding or moving an outlet is electrical work that requires a licensed electrician in Texas, and we don't perform licensed electrical work. We'll tell you exactly where an outlet should go so an electrician can add it, and plan the TV install around it.

Will my TV remote control the soundbar?

Usually, yes. When a soundbar is connected through HDMI ARC or eARC, many TVs and soundbars can share one remote for power and volume. We connect it, check the settings and test it with your TV before we leave.

Soundbar installation

How long does a TV installation take?

It depends on the job. A single TV on drywall is the quickest; fireplaces, masonry, in-wall wiring, large screens and multiple TVs take longer. We'll give you a time estimate with your quote.

Sources

  1. EC&M, What's Wrong Here? Hint: This gets my seal of non-approval. August 17, 2018.
  2. EC&M, What's Wrong Here? Hint: There's an Error of Omission. November 18, 2019.
  3. Gizmodo, Your Wall-Mounted HDTV Probably Violates Electrical Codes. June 22, 2009.

How we do it

Wire management: Cord covers or code-compliant in-wall kits, so the only thing on the wall is the TV.

Find our guides useful? Add TVRight as a preferred source on Google.

Want the wires gone?

TV mounting from $69. Tell us about your TV and your wall, add a photo, and we'll quote it.