Can you mount a TV above a fireplace?
Yes, if the wall stays cool enough. Tape a thermometer where the TV would hang and run the fire for several hours: if it reaches 100°F, that spot is too hot for a TV. Over a fireplace the TV also sits high, so a tilting mount angles it down, or a pull-down mount brings it to eye level while you watch.
Updated
- Heat test
- A thermometer where the TV would hang, fire on for several hours
- Too hot
- 100°F or more at that spot
- Too high
- A tilting mount angles it down; a pull-down mount brings it to eye level
Test the heat first
The wall above a fireplace is often warmer than the rest of the room, and a gas fireplace can put out 20,000 to 35,000 BTUs of heat an hour, according to Bob Vila. The same guide gives a simple test before anything goes on the wall:
- Tape a thermometer to the wall where the middle of the TV would hang.
- Light the fireplace the way you normally use it and let it run for several hours.
- Check the thermometer. If it reaches 100°F, that spot is too hot for a TV.
Heat and TVs don't mix: the Journal of Light Construction warns that a TV repeatedly sitting in rising air over 100 degrees could have its life cut short, and that vent-free gas logs send out especially high heat.
What a deeper mantel does
A mantel works like a shelf for heat. In Bob Vila's words, the farther the mantel sticks out from the wall, the more heat it turns away from the wall and the TV above it. A surround that's flush with the wall turns none away, so the heat test matters even more there.
Then the height
The mantel sets a floor, so a TV over a fireplace always ends up above eye level. In our TV height guide, a 65-inch TV hung 6 inches above a 54-inch mantel puts the center of the screen about 76 inches up, and from 10 feet away the top of the screen is about 23 degrees above a seated viewer's eyes. That's the neck-craning the Journal of Light Construction warns about. Two kinds of mount help:
- A tilting mount angles the screen down toward the seats, so you're looking at it straight on instead of from underneath.
- A pull-down mount brings the whole TV down to eye level while you watch, then folds it back up over the mantel.
Wires and power over a fireplace
A brick or stone surround leaves fewer places to hide cables, so plan the route with the mount: down the side in a cord cover painted to match, or inside the wall where the wall allows it. A new outlet above the mantel is a job for a licensed electrician, and we'll tell you exactly where it should go. Here are the ways to hide TV wires, and the one thing never to do.
What we check from your photos
Send a photo of the fireplace and the wall above it, and tell us how the heat test went. We look at the surround (brick, stone, tile or drywall), how far the mantel sticks out, where the outlet is and how big the TV is, and we check it all before we quote. Mounting above a fireplace adds $75, and that covers the brick, stone or tile above it too. Brick or stone above the mantel? Here's how brick and stone get drilled, or see our fireplace TV mounting page.
Some TVs we've mounted
Real installs around San Antonio. Tap a photo to see it larger.
Showing 2 projects
Related questions
Can you mount a TV above a fireplace?
Yes. Fireplace installs need extra planning for viewing height, heat, mantel clearance and where the wires will go, and the approach depends on whether the surround is brick, stone, tile or drywall.
Can you install a pull-down mount like MantelMount?
Yes. A pull-down mount lets a TV above a fireplace come down to eye level while you watch and fold back up when you're done. These mounts are heavy and need solid anchoring behind the surround, so we check your wall and fireplace from your photos and quote them individually. Choose the specialty mount option in the quote form.
How high should my TV be mounted?
In most living rooms, the center of the screen should sit close to your eye level when you're seated, often around 40 to 45 inches from the floor, depending on your seating and screen size. Above a fireplace it will sit higher, which is where a tilting or pull-down mount helps. We mark the position and confirm it with you before drilling.
Can you hide the wires?
Yes. Options range from bundling cables neatly behind the TV, to a slim paintable cord cover on the wall, to in-wall concealment on suitable walls using kits rated for in-wall use. We never run standard power cords inside a wall, because they aren't rated for it.
Sources
- Bob Vila, Solved! Why It's a Mistake to Mount a TV Above a Fireplace. Updated April 29, 2024.
- Journal of Light Construction, Tips for Installing a Television Over a Fireplace. April 10, 2013.
How we do it
Fireplace TV mounting: Height, heat, mantel clearance and wiring planned before we drill, on brick, stone or drywall.
More guides
- How high should you mount a TV?The eye-level rule, heights by TV size, and what changes over a fireplace.
- Can you mount a TV on brick or stone?Why the brick beats the mortar, the tools it takes, what's different about stone veneer, and confirming the spot first.
- How do you hide TV wires?Bundling, a paintable cord cover and in-wall kits, and why the TV's power cord never goes inside the wall.
Find our guides useful? Add TVRight as a preferred source on Google.
Planning a TV over your fireplace?
TV mounting from $69. Tell us about your TV and your wall, add a photo, and we'll quote it.