Can you mount a TV on brick or stone?
Yes. Brick holds a TV very well when it's drilled right: into the brick itself, not the mortar, with a hammer drill, masonry bits and anchors made for masonry. Stone veneer is different, because it's often a thin layer over framing, so we check what's behind it first. And because holes in brick can be patched but never fully disappear, we confirm the spot with you before drilling.
Updated
- Drill into
- The brick itself, not the mortar
- Edges
- At least ½" from the edge of a brick
- Tools
- Hammer drill, masonry bits, masonry anchors
Into the brick, not the mortar
Mortar is the softer material between the bricks, and an anchor set in it loosens over time: This Old House says mortar is much softer than brick and the anchor's grip will eventually deteriorate. Brick maker Pine Hall Brick adds that the dense, fired clay of the brick grips concrete screws tightly and won't wear down.
So the holes go in the face of the bricks. If a mark lands on a mortar line, the bracket shifts until it doesn't, and This Old House also says to stay at least half an inch from a brick's edges, where it can crack.
The tools it takes
- A hammer drill. The hammering action is what gets through brick; per Pine Hall Brick, a standard drill won't cut it.
- Masonry bits, with the chisel-like tips This Old House calls an absolute must.
- Anchors made for masonry. Not the plastic drywall anchors that come with most mounts, which Pine Hall Brick says you won't need, but heavy-duty anchors rated for solid surfaces, in MantelMount's words. For TVs over 75 pounds, This Old House recommends concrete screws.
Stone veneer is different
Solid brick and block hold a mount on their own. Stone veneer often doesn't: it's usually a thin layer of stone, natural or manufactured, fixed over the wall behind it. What holds the TV then is that wall, whether it's studs, block or concrete, so we check what's behind the stone before we quote and choose the fasteners to reach it.
Holes in brick don't disappear
A hole in drywall patches flat and paints over. A hole in brick can be filled and color-matched, but it never fully disappears. That's why we tape up the TV's outline and confirm the spot with you before the first hole, and why it pays to know how high you want the TV before anyone drills.
Brick or stone over a fireplace
A lot of brick and stone walls are fireplace surrounds. The drilling is the same, but check the heat first: here's the fireplace heat test.
What it adds
Masonry takes longer to drill than drywall, so a brick or concrete wall adds $50 and a stone or tile wall adds $100. Send a photo of the wall when you ask for a quote, and see our brick, stone and concrete mounting page for more.
Related questions
Can you mount a TV on brick, stone or tile?
Yes. Masonry and tile use different drill bits and anchors than drywall, and we choose hole locations around the material's condition. Holes in masonry can be patched but won't vanish, so we confirm placement with you first.
Can you mount a TV above a fireplace?
Yes. Fireplace installs need extra planning for viewing height, heat, mantel clearance and where the wires will go, and the approach depends on whether the surround is brick, stone, tile or drywall.
How big a TV can you mount?
Everything from small bedroom TVs to 85-inch-plus screens. For large or heavy TVs we confirm the mount's weight rating and mounting pattern, how the wall is built, and whether the lift needs a second person. We plan all of that when we quote.
Why do you ask for photos?
Photos of the wall, your TV's model label and any mount you already have show us the details that change a job: wall material, outlet locations, fireplace clearances and whether a mount fits your TV. That lets us quote accurately before we arrive. Your photos stay private and are only used for your request.
Sources
- This Old House, How To Hang a TV on Brick Wall. Updated October 3, 2024.
- Pine Hall Brick, How to Mount a TV on a Brick Wall. February 27, 2023.
- MantelMount, Mounting Your TV on Brick or Stone: What You Need to Know. June 25, 2025.
How we do it
Brick, stone and concrete TV mounting: The right bits and anchors for masonry and tile, with holes placed for strength.
More guides
- Can you mount a TV above a fireplace?The heat test, what a deeper mantel does, and fixing the height with a tilting or pull-down mount.
- How much weight can drywall hold for a TV?Why the studs, not the drywall, hold a TV, how far apart they are, and what one mount maker asks of the wall.
- Fixed, tilting or full-motion: which TV mount do you need?What each mount does, which rooms suit it, and why a full-motion arm needs studs or solid masonry.
Find our guides useful? Add TVRight as a preferred source on Google.
Brick, stone or tile wall?
TV mounting from $69. Tell us about your TV and your wall, add a photo, and we'll quote it.