Skip to content
TVRight, home

Should you mount a TV yourself?

You can, if the wall is drywall over wood studs, two people can lift the TV, and you have a stud finder, a drill and a level. It's worth hiring out for a big TV, brick or stone, a fireplace, a full-motion arm or wires inside the wall. Either way, the mount goes into the studs, never the drywall alone, and a TV that stays on a stand should be anchored so it can't tip over.

Updated

Fine yourself
Drywall over wood studs, a TV two people can lift
Worth hiring
Big TVs, brick or stone, fireplaces, in-wall wires
Never
A mount in drywall alone, with no stud behind it
Gerald isn't his real name. His 1935 photo comes from the Library of Congress.

When doing it yourself is fine

  • The wall is drywall over wood studs.
  • You and a helper can lift the TV and hold it steady at the wall.
  • It's a fixed or tilting mount, rated for more than the TV weighs and made for its hole pattern.
  • There's an outlet nearby, and you're happy to bundle the wires or cover them.

You'll need a stud finder, a drill with the bit size the mount's instructions call for, a level, a socket wrench and a pencil.

How it goes, step by step

  1. Pick the height: the middle of the screen at your eye level when you sit. How to find your number.
  2. Check the mount fits the TV: the hole pattern on the back and the weight. How to check.
  3. Find the studs and mark them. Ways to find them.
  4. Hold the wall plate level over the studs, mark the holes, drill pilot holes and bolt the plate on with the lag bolts that came with the mount.
  5. Attach the brackets to the back of the TV, lift it onto the plate with your helper and lock it on, as the mount's manual shows.
  6. Check it's level, then tidy the wires. Three ways to hide them.

When it's worth hiring out

  • A big, heavy TV. Lifting it onto the plate and holding it steady takes two people, and a dropped big screen is an expensive mistake.
  • Brick, stone or tile. It takes a hammer drill and anchors made for masonry, in the right spot. Brick, not mortar.
  • Above a fireplace. The spot has to pass a heat test first, and the height needs planning. The heat test.
  • A full-motion arm. Swung out, it pulls hardest on the wall. Why it needs studs.
  • Wires inside the wall. That takes an in-wall power kit made for the job. How it's done.
  • A Samsung Frame. It has its own slim mount, and on many models a separate device box to plan for. What's different.

Mistakes to avoid

  • Screwing the mount into drywall with no stud behind it. The SANUS tilting and full-motion mount manuals we read both say not to install into drywall alone.
  • A mount rated for less than the TV weighs, or made for a different hole pattern.
  • Hanging it too high, so you watch with your head tipped back.
  • Pushing the TV's own power cord through the wall. Why not.
  • Tightening the last bolt before checking the TV is level.
  • Going over a fireplace without testing the heat first.

Mount it, or keep it on a stand?

A stand is fine when the screen sits at eye level on it and you'd rather not drill, like in a rental. A mount frees the floor, puts the screen at the right height and keeps the TV from tipping over.

Tip-overs are a real risk. The U.S. Consumer Product Safety Commission counts about 17,800 emergency-room injuries a year from TVs, furniture and appliances tipping over (2020 to 2022), and 47% of the tip-over deaths it recorded from 2013 to July 2023 involved a TV. Its advice: “Anchor TVs and furniture, such as bookcases and dressers, securely to the wall.” Where that isn't possible, it says to put the TV on a sturdy, low base, pushed back as far as it goes, with the cords out of reach.

What it costs to have it done

Mounting starts at $69 for one TV up to 55 inches on drywall, with your own mount. A bigger TV, a harder wall or hidden wires each add a set amount, and the quote form adds it up as you answer. What adds what.

Some TVs we've mounted

Real installs around San Antonio. Tap a photo to see it larger.

Showing 3 projects

Related questions

How much does it cost to mount a TV in San Antonio?

TV mounting starts at $69 for a TV up to 55 inches on drywall, using your own mount. A bigger TV, a brick or stone wall, a fireplace, a mount from us, hidden wires or a soundbar each add a set amount, and the quote form adds it all up as you go. The final price is confirmed from your wall photos.

See all prices

Do I need to buy a mount before you come?

No. If you already have one, choose its type in the quote form and we'll confirm it's right for your TV and wall. If you don't, tell us whether you want the TV fixed flat, tilting or full-motion, and we'll recommend a mount when we quote.

Which mount fits your TV: the full guide

How big a TV can you mount?

Everything from small bedroom TVs to 85-inch-plus screens. For large or heavy TVs we confirm the mount's weight rating and mounting pattern, how the wall is built, and whether the lift needs a second person. We plan all of that when we quote.

Large TV mounting

Can you hide the wires?

Yes. Options range from bundling cables neatly behind the TV, to a slim paintable cord cover on the wall, to in-wall concealment on suitable walls using kits rated for in-wall use. We never run standard power cords inside a wall, because they aren't rated for it.

Wire management options

Sources

  1. SANUS, BLT3-B1 instruction manual. June 2024.
  2. SANUS, BLF328 instruction manual. August 2019.
  3. U.S. Consumer Product Safety Commission, Ahead of Sunday’s Game, CPSC Reminds Families to Tackle the Deadly Hazard of TV and Furniture Tip-Overs. February 8, 2024.

How we do it

TV mounting: Any size, any room. Fixed, tilting, full-motion and flush mounts, level and set at the right height.

Find our guides useful? Add TVRight as a preferred source on Google.

Rather have it done?

TV mounting from $69. Tell us about your TV and your wall, add a photo, and we'll quote it.